Why the Geekvape AEGIS Boost Pod System Won’t Work With Other Kits

By VaperBlogCiga No comments

This is the first review of the new e pens from Vandy Vapor. In my opinion, these are the best vaporizers out there. For a few bucks they go a long way. The Geekvape AEGIS Boost Pro is a full size tankless unit with a triple bottom base. It also has a triple scalloped bottom and a triple airflow system. This is one of the newest products in the market and I am very excited to see how it performs.

geekvape aegis boost

Vandy Vapor has really put their money where their mouth is with the new cool thing they have called the aegis boost pro. It’s the first time that Vapefly has featured an actual aegis in a product. It has a metal body with great craftsmanship. The pen style unit works extremely well with a single and double battery. The Vapefly Siegfried can be loaded with a variety of batteries including: the classic ecu, stainless steel, and the newer hybrid.

The aegis boost offers the standard vaper/bowl style with a top-filled reservoir and a two post ground section. The bottom of the unit is open where you can fill the reservoir with water or liquid. There is also an adjustable airflow control with a side pull design. This allows the user to increase or decrease the air flow through the body of the vaporizer.

The new Warmth type-C has an open-topped design. There are no coils on the body. Instead, the entire heating system is located in the bottom of the bowl. There are a stainless steel post and two screws holding the base together.

The new Warmth aegis incorporates a new technology which allows for the coils to be pre-heated prior to use. The new pod system allows for even heating of the coils and eliminates issues that have been experienced with the older type-I and dual coil systems. With the Warmth aegis, you will experience a smooth, constant and clean vapor while being able to control the temperature of your vapors. The ability to control your vapor output gives you the opportunity to vary the strength of your clouds with each vaporizer.

The new style of AEGIS allows you to change the wattage output range at anytime. This makes it very easy to regulate your personal power level. When you start out at a low wattage output, you can slowly ramp up the wattage until you reach your desired temperatures. You can also use the turbo feature which will increase the wattage output and run the AEGIS for a longer time without shutting down.

The geekvape aegis boost utilizes two adjustment buttons to control the power of your vaporizer. The first button starts off at a low wattage and decreases slowly as time progresses. The second adjustment button increases the wattage and starts off at a higher wattage. Using either button will allow you to customize the strength and power of your clouds.

The flavor of your vapor will be completely customizable with the use of the Geekvape AEGIS Boost Pod System. There are two pod bases that can be attached to your tank via a stainless steel spring or a USB cord. The pod bases have a screw on the bottom to hold them in place while they are securely screwed into place. Once attached to the tanks, there are stainless steel screws that allow you to remove the base and add more batteries, changing the power of your AEG if needed.

If you would like to add a little something to your AEG, the Geekvape AEGIS Boost Pod System makes it easy to incorporate your own flavors into your vapor mixture. Simply add a pod containing your favorite flavors and place it into the tank. Using the included air flow control ring, you will be able to increase or decrease the amount of vapor produced. The airflow control ring allows you to change the amount of vapor produced based upon the temperature of the outer shell that holds the pods. Just simply turn the airflow control ring to increase or decrease the temperature of the inside of the pod.

Although the aegis mod geekvape is primarily designed for the personal market, this kit can be used by any age user because of its universal voltage output. You can use the kit with any aegis mod, including the RTA and the iTop-IIC. Even if you are not familiar with how to build a deck, this kit is easy to install because of the universal voltage output that is level up to the voltage of your personal unit.

When using the Geekvape AEGIS Boost Pod System, it is important to note that the outer shell of the unit will not allow for the removal of the preloaded wick. If you do not wish to use this, then it is recommended that you purchase a separate pod that is compatible with the outer shell. Many users have reported that the outer shell of the AEGIS Boost Pod System easily attaches to the ends of their tanks and works with ease. Some users have reported that the outer casing can come off without any issues, but the coils are made so that they cannot be removed easily. For those that want to remove their coils, the tank must first be disassembled and the wires removed before removing the outer cover of the system.

Leave a Reply