Review about Voopoo Coils Drag 2 Mini Kit Vinci RBA Too Software Pnp Pod

By VaperBlogCiga No comments

Vapeciga Voopoo Drag 2 Mini Kit is dual mod 18650. Capable of 157 watts. It is available in 2 colors both have a silver frame, but the choice is sticker black carbon fiber sticker carbon fiber white or black and red.

They say 0.025 to 0.03 at the end of the second player (site of the mod chip sites that say 0.03 0025) This is a new chip sport (chip is equipped with software to allow customization. Some features include a curved screen watt adjustable temperature curve and air conditioning and a wide array of standard safety features.

Manufacturer Specifications:

Power: 5-157W
Batteries (battery charge-balancing compatible with all brands) 2 x 18650
Dimensions: 90 x 54 x 24 mm
Color: Black and white / red black
resistance to low power mode: 0.05Ω
low resistance mode TC: 0.05Ω
New features: super compensation mode and power mode.
TC MODE: SS, NI, TI, North Carolina, TCR, JRC

first impressions and characteristics
When I came to this mod, I must say I’m impressed. Appearance and quality construction mod are not what you expect from such a cheap device. It had a weight to it and feels solid. 510 pin end and a constant resistance and stable outlet for me. the screen is pretty standard. As you can see in the DNA chip or smoant mods, etc. The menu system is a bit of a learning curve, but well designed and easy to learn and remember. It has a curve to full power where you can adjust your spray 1 second programmable chip or by software. You can also delete mode will not, for example, I removed Ni and Ti-way devices. Overall, the build quality, performance and features that you can not expect this to be as cheap mod. Maybe should cost more than it does.

Performance mode Watts
First, let’s address the elephant in the room. Claims fire from 0.025 to 0.03 seconds of delay. This is something that I see thrown around a lot of criticism.

To me too he felt as keywords in an attempt to exaggerate the already good Voopoo Vinci RBA show new (aka do not need a marketing BS substance for sale, must sell) I tested the speed of fire, because I do not feel the need.

This is not 2014, I can not remember the last time I use a mod that a delay of a fire in it. Meanwhile, rapid fire mods. And the difference between saying and 0.07 seconds 0.03 seconds is not relevant. Magazine that continues to pump the sound is more like a future revision advertising player. The only time to talk about the shooting speed mod is if you have a noticeable delay. This mod is not, or a model I tested and verified. Without delay the fire, but the same can be said for any i mod. As I said, there is no need to talk, except mod is a delay, then it will be a scam. I hope that changes no delays in the fire at the time. It is a normal thing. If you want a fun little test to test its delayed entry (also known as reaction time) 58% are between 0.2 and 0.35 second, 10 times the chip and still feel a moment. Here is a test you can take the reaction timer and here are the data that are the result of the response of your time!

Now that we have the way, let’s get into some of the data. Watt performance mode this chip is very good. In less than 50 watts or less mod resistance was the precise death. A 100 watts in the worst case, with a resistance of 0.01 ohm (most mods fighting), had only 7 watts lower. On the other resistance, no more than 4 watts. The test was 125 watts 11 watts to 0.01 ohms, but no more than 7 more resistance, except that 0.52 ohms affect limit volts. mod no output was 157 watts and more. Peaking at 168 watts. It also offers a limit of 39 amps (better battery dual mod) and the limit of 7,158 volts (also one of the best double mod drums) Compared with Therion 167 (dual mod 18650 with a limit of 167 watts for a better fries and the most expensive on the market) is the chip that topped out at 165 watts. A 0.13 ohm (I tested the low and resistance is easier to specify the output) to 125 watts and 14 watts to 100 watts down to 12 watts low. The overall performance in watts traveling mode is very similar to the DNA of 250 chips in a dual battery configuration. mod also took a measure of the very stable and accurate resistance. The connection 510 of the shaft is solid and the outlet of the flexible and coherent device. Not much more you can ask for. Overall, this is a fantastic watt devices so.

These are the most noticeable changes. 2 Slide matte paint job all OG and was not very good and very easy to scratch, you can see here

Platinum, but we redid the paint work is light brown and was much better and much more resistant to scratches. While good in the paint compared to OG, but some prefer the matte look and yes because it was the shiny fingerprint magnet, too.

Here is a peak comparison also added in an accent color with SS line around the frame and the screen compared to the Voopoo Too Coils click in are all black matte can be seen that the resin is still great, but as you can see here on the side of the other

Some minor repairs were made on the screen. These remains pretty much the same but has a slightly bluish platinum screen and a little lighter. Here you can see the other side

Unfortunately, although still quite low as you can see here
rincoe mechanical man mod leave a little brighter and enough bite and the right mix is ​​Eleaf istick brighter.

It is a difference that, in addition to things, is the same model as the feeling is still there. The only difference is that I’ll remove the “fine painting me” and move it to the pros as “a good paint job”, but beyond that, there are more changes in the release slide my 2 platinum, but want to figure people know what they who wrote so little difference. Thaks all for reading

Wire mode using SS SS (TCR adjustment in 1400 even better wear) mod has done a good job. then the output is smooth and uniform time. It is protected dry and did throw a good job of sucking the juice before cutting. With the construction of the normal test (single SS316 and SS316 double room spaces) performance was fantastic. It felt kind of access the lower side about 20 degrees lowered. I found the best 400-480 depending on your preference. 500 is the maximum before it gets too hot vape. 550 will start recording her little cotton.

A coil fantasy I large single building during normal use, I found very good Vapeciga Voopoo Drag Software as the exit ramp is fast and smooth.

Very good vaporizer. The downside is that the limit of 80 watts even very low ohms not enough. When you drop down .2ohm with great luxury coil watts is never more than 45 watts. This means the car to get there and it took forever. Not much vaporizer. Still protected, but the lack of a way to do good in this situation. So overall, I say that the control device temperature is also largely, the vast double coil exception is less than 0.2 ohm to increase not. 80 watt limit not make full use of the 80 also in this situation it will not go away. All other situations so it was nice. But not over-accumulation of resistance is too low and can build up to 80 watts of heat, a large vaporizer. He spent all of me because most people go to these limits.

The general impression
Watt performance mode is one of the best in the history individually tested. Very stable, very soft, very consistent and very accurate. Watt add curves to make a better choice than the Ministry of Defense precision without. excellent temperature control in most situations. Build quality is excellent. The design is elegant and simple. I was very impressed with this device, in particular lower $ 50 price (as low as $ 40) has one of the best values ​​on the right side vaping to combat and Charon. VooPoo probably a terrible name, but they did a great mod and loss. This mod is really put IJOY, wismec, Smok, etc. Joyetech shame IMO. You can make a great show, great quality at an affordable price mod

manufacturing quality
Watts performance mode
watt characteristics curve
the operating mode of temperature (in most situations)
Appearance (simple and elegant design)
suite of software to customize
Good system menu with lots of mod neighborhood
Less than 50 years for me, as low as $ 40 Y
it will not update the firmware of my
performance of temperature control in certain situations (large rolls under .2ohms)
So, with all that said, I recommend this mod? I do not like or are not difficult, but a strong inclination toward him. If the temperature control is performed almost a no-brainer. One of the best devices running watts all the way to actually build the budget money is very good. If the temperature control is used, the accumulation time is not as shown above, there is a large temperature control of the vaporizer.

The only reason that this would not change if only Voopoo Pnp Pod Kit get code a control coil temperature with a double below 0.2 ohms.

Beyond this mod is almost a must for all fans and an excellent choice for those who want to improve their mod mod or just again generally added this mod to Google recommendation My sheet as controlling the temperature of the intermediate device and like devices W guide (in this case, the file is updated regularly in order to be a lead-free. three tabs for juice, for mods, and 1 to Attys)

As usual, Anthony Frei and still sincerely hope that you can say to do the same thing and I see you at the next revision

Some future comments: Geekvape Mech Pro, Aspire Archon, Pharaoh RTA Aspire Cleito Kel, Kaos Erebus 25mm RTA Envii Terra Octo RTA iJoy Lux, Rasa Blazer 200, Dovpo Rogue Fuchai Duo 3 next deposit captain IJOY Cornelio 3Ohm, Smoant Rabox and more. If you know the product you want to see my review, feel free to ask

You can buy here:Voopoo Coils

sourcemore thanks

Leave a Reply